Chapter 5 Configuring Additional Router Features
Configuration Limiting
Examples
The following examples illustrate OSPF configuration limits:
•Maximum Interfaces for Each OSPF Instance: Example, page
•Maximum Routes Redistributed into OSPF: Example, page
•Number of Parallel Links
Maximum Interfaces for Each OSPF Instance: Example
In the following example, the show ospf command is used to display the maximum number of OSPF
interfaces: RP/0/RP1/CPU0:router# show ospf
Routing Process "ospf 100" with ID 0.0.0.0 Supports only single TOS(TOS0) routes Supports opaque LSA
It is an area border router
Initial SPF schedule delay 5000 msecs
Minimum hold time between two consecutive SPFs 10000 msecs Maximum wait time between two consecutive SPFs 10000 msecs Initial LSA throttle delay 500 msecs
Minimum hold time for LSA throttle 5000 msecs Maximum wait time for LSA throttle 5000 msecs
Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs Maximum number of configured interfaces 255
The following example configures the maximum interface limit on a router:
RP/0/RP1/CPU0:router# configure
RP/0/RP1/CPU0:router(config)# router ospf 100
Uncommitted changes found, commit them? [yes]: y
RP/0/RP1/CPU0:Mar 30 16:12:39 : config[65740]:
RP/0/RP1/CPU0:Mar 30 16:12:39 : config[65740]:
RP/0/RP1/CPU0:router# show ospf
Routing Process "ospf 100" with ID 0.0.0.0 Supports only single TOS(TOS0) routes Supports opaque LSA
It is an area border router
Initial SPF schedule delay 5000 msecs
Minimum hold time between two consecutive SPFs 10000 msecs Maximum wait time between two consecutive SPFs 10000 msecs Initial LSA throttle delay 500 msecs
Minimum hold time for LSA throttle 5000 msecs Maximum wait time for LSA throttle 5000 msecs
Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs Maximum number of configured interfaces 600
| Cisco IOS XR Getting Started Guide |
|
