Cisco Systems OL-14361-01 manual 128

Chapter 5 Configuring Additional Router Features

Configuration Limiting

Examples

In the following example, the show rpl maximum command is used in EXEC mode to display the current setting for RPL limits and number of each limit currently in use. A summary of the memory used by all of the defined policies is also shown below the limit settings.

RP/0/RP1/CPU0:router# show rpl maximum

Current	Current	Max
Total	Limit	Limit

------------------------------------------------------------

Lines of configuration	0	65536	131072
Policies	0	3500	5000
Compiled policies size (kB)	0
RP/0/RP1/CPU0:router#

In the next example, the rpl maximum command changes the currently configured line and policy limits. The show rpl maximum command displays the new settings.

RP/0/RP1/CPU0:router# configure

RP/0/RP1/CPU0:router(config)# rpl maximum policies 4000

RP/0/RP1/CPU0:router(config)# rpl maximum lines 80000

RP/0/RP1/CPU0:router(config)# commit

RP/0/RP1/CPU0:Apr 1 00:23:44.062 : config[65709]: %LIBTARCFG-6-COMMIT : Configuration committed by user 'UNKNOWN'. Use 'show configuration commit changes 1000000010' to view the changes.

RP/0/RP1/CPU0:router(config)# exit

RP/0/RP1/CPU0:Apr 1 00:23:47.781 : config[65709]: %SYS-5-CONFIG_I : Configured from console by console

RP/0/RP1/CPU0:router# show rpl maximum

Current	Current	Max
Total	Limit	Limit

------------------------------------------------------------

Lines of configuration	0	80000	131072
Policies	0	4000	5000
Compiled policies size (kB)	0
RP/0/RP1/CPU0:router#

	Cisco IOS XR Getting Started Guide
5-128	OL-14361-01