Cisco Systems OL-1911-05 manual ATM Switch Router ATM Router Module Interface

Chapter 24 Configuring ATM Router Module Interfaces

Configuring LECs on ATM Router Module Interfaces (Catalyst 8540 MSR)

Router 1 ATM Interface

Router1# configure terminal

Router1(config)# interface atm 2/0

Router1(config-if)#ip address 1.0.0.1 255.0.0.0

Router1(config-if)# atm pvc 1 0 5 qsaal

Router1(config-if)# atm pvc 2 0 16 ilmi

Router1(config-if)#lane client ethernet happy

Router1(config-if)# end

Router1#

ATM Switch Router ATM Router Module Interface

Switch# configure terminal

Switch(config)# interface atm 2/0/0

Switch(config-if)#ip address 1.0.0.2 255.0.0.0

Switch(config-if)#lane client ethernet BACKBONE

Switch(config-if)# end

Switch#

Router 2 ATM Interface

Router2# configure terminal

Router2(config)# interface atm 3/0

Router2(config-if)#ip address 1.0.0.3 255.0.0.0

Router2(config-if)# no ip mroute-cache

Router2(config-if)# atm pvc 1 0 5 qsaal

Router2(config-if)# atm pvc 2 0 16 ilmi

Router2(config-if)#no atm ilmi-keepalive

Router2(config-if)#lane client ethernet BACKBONE

Router2(config-if)# end

Router2#

For detailed information on configuring LANE clients (LECs), see Chapter 13, “Configuring

LAN Emulation.”

LANE Routing from ATM to Ethernet

The following example shows how to configure LANE routing from ATM to Ethernet using the ATM router module. Figure 24-4shows an example of a LANE network for LANE routing from ATM to Ethernet.

Figure 24-4 Example Network for LANE Routing from ATM to Ethernet

Router 1		Catalyst 8540 MSR
	ATM 2/0		GE 9/0/0
		ATM router module
		Interface ATM 2/0/0

Router 2

GE 9/0/0

45222

	ATM and Layer 3 Switch Router Software Configuration Guide
OL-1911-05		24-13