Chapter 4 Operation, Administration, and Maintenance

Maintenance Manager

The CLI interface resides on the NCB module and operates on the database server for the ONS 15200 system. The CLI interface has two modes of access for users—read-and-write access and read-only access. Users are separated into three categories: administrator, operator, and guest. Each category has different privileges:

Administrator—read-and-write access to security management data

Operator—read-and-write access to network management data

Guest—read-only access to network management data

To access the CLI interface, use the Ethernet port on the NCB module or the MA interface on the CIM module. MA interface access requires a EIA/TIA-232 cable.

4.5 Maintenance Manager

The Maintenance Manager (MM) interactive software tool, installed on a laptop or PC, provides a local craft interface for the ONS 15200 system. The MM software provides access to the internal data bus at ONS 15252 MCUs or ONS 15201 SCUs. It also facilitates access to data from isolated ONS 15201 SCUs in the ONS 15200 network.

In addition to the required cabling, a laptop must have a controller area network (CAN) Personal Computer Memory Card International Association (PCMCIA) board to use the MM software package as a local craft interface.

Connect your MM-equipped computer to the ONS 15200 system through the MA port as shown in the following figures. Figure 4-2 on page 4-5shows the management access connection to an ONS 15252 MCU. Figure 4-3shows the management access connection to an ONS 15201 SCU.

Figure 4-3 ONS 15201 SCU management access interface

MA interface

LEGEND

MA - Management access

54643

Cisco ONS 15200 Product Description

4-6

78-13766-01

 

 

Page 44
Image 44
Cisco Systems ONS 15200 manual Maintenance Manager, MA interface