Pioneer VSX-AX5Ai-G Changing the frequency step, Maintenance of external surfaces, USB interface

12Additional information

Message	Explanation
PQLS ON	This is displayed on a playback component when PQLS turns on during playback. The sound may be
	interrupted momentarily when this happens.
UNKNOWN	When an i.LINK-equipped component name cannot be recognized, this message is displayed instead of
	the proper component name.

USB interface

Symptom Cause Remedy

No sound. • The computer settings are incorrect.

•Make sure you have set up your computer system to output through the USB interface (see Using the USB interface on page 78).

•The software or source material you are using is not compatible with USB output.

•Update to a more recent version of your existing software, try a different audio program, or try a different source.

• The volume control on your computer is set • Turn up the volume on your computer. too low.

Note

•If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.

Changing the frequency step

Multi-voltage model only

If you find that you cant tune into stations successfully, the frequency step may not be suitable for your country/ region. Heres how to switch the setting:

1Switch the receiver into standby.

2While holding down the front panel TONE –

button, press the STANDBY/ON.

The display shows the new setting:

•STEP 9K/50K – For areas with an FM reception of 50kHz and AM reception of 9kHz

•STEP10K/100K – For areas with an FM reception of 100kHz and AM reception of 10kHz

Note

•If you’re unsure of the correct frequency step for your region, consult your local Pioneer dealer.

Maintenance of external surfaces

•Use a polishing cloth or dry cloth to wipe off dust and dirt.

•When the surfaces are dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleaners.

•Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface.

102

En