Pioneer VSX-AX5Ai-S Adjusting the remote control backlight, Clearing remote control settings

Using other functions 09

4Press the button you want to rename.

5Edit the button as necessary.

Use	(cursor up/down) to select letters and/or
numbers and use		(cursor left/right) to move the

cursor forward/back a position. The name can be up to eight characters (the possible characters are listed below).

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz

0123456789 (space)

!”#$%&’()*+,–./:;<=>?@[ \ ]^_`{}~

· (space)

6When you're finished press ENTER. When you see END flash, press ENTER again. COMPLETE shows in the display to confirm that the name has been changed.

•Go back to step 2 to edit more names.

7 When you’re finished, use (cursor up/down) to select ‘*Exit*’ from the menu and press ENTER.

Adjusting the remote control backlight

You can adjust the brightness of the backlight on the remote control display, or simply switch it off.

1Press and hold REMOTE SETUP for three seconds. The REMOTE SETUP menu appears in the remote control display.

2	Use	(cursor up/down) to select ‘Light’ from
the menu and press ENTER.
3	Use	(cursor up/down) to select ‘High’, ‘Low’

or ‘Off’ and press ENTER.

COMPLETE appears in the display to confirm the setting.

4 When you’re finished, use (cursor up/down) to select ‘*Exit*’ from the menu and press ENTER.

Clearing remote control settings

This feature allows you to clear a learned command or key label for a particular button, or all of the settings from the remote.

1Press and hold REMOTE SETUP for three seconds. The REMOTE SETUP menu appears in the remote control display.

2	Use	(cursor up/down) to select ‘Clear’ from
the menu and press ENTER.
CLEAR appears in the display.
3	Use	(cursor up/down) to select what you

want to clear, and press ENTER. Choose between the following:

•Learning Clear – Clear a learned command (see Programming signals from other remote controls on page 59) you have assigned to a button (Select Function flashes in the display).

•KeyLabel Clear – Clear a name (see Editing remote control display names above) you have assigned to a button (Select Function flashes in the display).

•All Clear – Clear all custom settings you have made with the remote (CLEAR? shows in the display). Go to step 6.

4Press the MULTI CONTROL button of the component for which you want to clear a command or key label.

Select Key flashes in the display.

5Press the button you want to clear.

The button you selected, then CLEAR? appears in the display.

6 Use (cursor up/down) to select ‘Yes’ and press ENTER.

COMPLETE appears in the display.

•Select No or *Exit* to exit and return to the REMOTE SETUP menu.

7 When you’re finished, use (cursor up/down) to select ‘*Exit*’ from the menu and press ENTER.

69

En