Connecting your equipment
03
20
En

Connecting the multichannel analog outputs

For DVD Audio and SACD playback, your DVD player may
have 5.1, 6.1 or 7.1 channel analog outputs (depending
on whether your player supports surround back
channels).
1 Connect the front, surround, center and
subwoofer outputs on your DVD player to the
corresponding MULTI CH IN jack on this receiver.
Use standard RCA phono cables for the connections.
Take care to connect each output to its
corresponding input on the receiver.
2If your DVD player also has outputs for surround
back channels, connect these to the corresponding
MULTI CH IN jacks on this receiver.
Use standard RCA phono cables for the connections.
If there is only a single surround back output, be sure
to connect it to the
SURROUND BACK L
jack on this
receiver.
Note
To listen to multichannel analog audio you’ll need to
press
MULTI CH INPUT
on the remote (see
Using the
multichannel analog inputs
on page 42 for more on
this).
S400
S400
CENTER
SELECTABLE
RL
RL
RL
MULTI CH. OUT
SURR.
BACK
FRONT SUB W. CENTER
SURR.

DVD player

MULTI CH
OUTPUT
VSX-AX5Ai

1 2

VSX-AX5Ai.book 20 ページ 2004年6月2日 水曜日 午後3時27分