Connecting your equipment 03
23
En

Connecting other video sources

You can basically use any of the audio/video inputs on
this receiver for any kind of video source. The example
illustration below shows a component connected to the
VCR2
inputs.
1 Connect the analog audio outputs and a video
output of the source component to a set of spare
audio/video inputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video or S-video
cable for the video connection.
See
About the video converter
on page 16 if you plan
to use a different type of video cable than you used to
connect your TV.
2 If the source component has a digital audio
output, connect it to a spare digital audio input on
this receiver.
Use a coaxial digital audio cable or an optical cable
for the connection depending on the type of input you
used.
You may need to assign the digital input you used
when setting up the receiver (see
Assigning the
digital inputs
on page 81).
S400
S400
CENTER
SELECTABLE
DIGITAL OUT
AV OUT
VIDEO S-VIDEOAUDIO
OPTICAL COAXIAL RL
VSX-AX5Ai

LD player, video player, TV game, etc.

1

2

VSX-AX5Ai.book 23 ページ 2004年6月2日 水曜日 午後3時27分