Contents
Change Card Settings
Before You Begin
11-1
C H A P T E R
DLP-E211 Install the ASAP 4PIO Modules, page 18-12 , as needed
Prerequisite Procedures
NTP-E147 Install the ASAP Card, page
DLP-E215 Install an SFP, page 18-14 , as needed
NTP-E148
Repeat Steps 5 through 7 to configure the port rates as needed
NTP-E151 Provision an Optical Line Rate
Preprovision an SFP Slot, page 2-8 or
11-4
NTP-E150 Change the Optical Line Rate
NTP-E157 Provision a Multirate PPM, page
Stop. You have completed this procedure
DLP-E115 Change the Service State for a Port, page
This procedure deletes PPM provisioning for SFPs on the ASAP card
NTP-E61 Modify or Delete Optical 1+1 Port Protection Settings, page
NTP-E149 Delete Pluggable Port Modules
Heading
Complete the “NTP-E69 Back Up the Database” procedure on page
Security
Description
Heading
11-7
OC-N Card Line Settings continued
Description
Description
11-8
Heading
Options
11-9
Step 8 As needed, complete the following
Description
11-10
Heading
Options
Description
11-11
Heading
Options
11-12
NTP-E105 Change an Optical Port to SDH
Step 3 Click the Provisioning Line tabs
Stop. You have completed this procedure
Chapter 2, “Install Cards and Fiber-Optic Cable”
NTP-E125 Change Card Service State
This procedure changes card service state
Admin State
Original Service State
11-14
Admin State
Next Service State