Cisco Systems PSUS4 The Status Tab Device, The Status Tab Printer, The Exit Tab, Select Printer

Chapter 2

Configuration

Select Printer

Logical Printer No:  In the drop-down menu, select the logical printer number (1-3) you wish to configure. Click Get Data to update the display with the current data for the selected logical printer.

Details

Pre-string (Hex)  Enter the printer control string (in hexadecimal characters) to be sent to the printer before each print job. This string cannot exceed 30 characters.

Post String (Hex)  Enter the printer control string (in hexadecimal characters) to be sent to the printer after each print job. This string cannot exceed 30 characters.

Convert LF to CR+LF  Select this option if you want to change all LF (line feed) characters to CR+LF (carriage return + line feed).

Change these settings as described here and click Save to apply your changes or click Cancel to cancel your changes.

The Status Tab > Device

The Device tab allows you to view information about the PrintServer. No settings can be changed on this screen. This screen is for information only.

Status > Device

Click Refresh to cause the PrintServer to retrieve this information again.

The Status Tab > Printer

The Printer tab allows you to view information about the Printer. No settings can be changed on this screen. This screen is for information only.

Status > Printer

Click Refresh to cause the PrintServer to retrieve this information again.

The Exit Tab

This tab is used exclusively for exiting the Web-based Utility.

Select the Exit tab and the following screen will appear. Click Yes if you want to exit the Utility. Click No if you don’t want to exit the Utility.

Status > Device

PrintServer for USB with 4-Port Switch 5