14
Step1 Ensure that there is no power going to the router.
Step2 Strip approximately 0.75 in (2 cm) of shielding from the wire.
Step3 Insert the stripped end of the wire into the open end of the ground lug, and crimp the lug.
Step4 Slide a segment of heat shrink tubing over the exposed grounding lug and wire connection.
Step5 Shrink the tubing in place, using a suitable heating device.
Step6 Attach the grounding lug to the router using two M5 hex head screws. See Figure 9 on page 13.
Step7 Connect the other end of the grounding wire to an appropriate ground source.