Installing and Removing a Solid State Drive

C o m m e n t s t o u c s - d o c f e e d b a ck @ c i s c o . c o m

Installing and Removing a Solid State Drive

There are up to 2 front-accessible, hot-swappable SSD drives per blade. You can remove or install supported blade server SSD drives (see Table 2 ) without removing the blade server from the chassis. All other component replacements for a blade server require removing the blade from the chassis. Unused SSD drive bays should always be covered with cover plates (N20-BBLKD-7MM) to assure proper cooling and ventilation.

Table 2

Supported SSD Drives (M1 Models)

 

 

 

Product ID

 

Description

 

 

UCS-SSD100GI1F105

100 GB Low Height 7mm SATA SSD hot plug/drive sled mounted1

N20-D032SSD

 

32 GB Low Height SATA SSD SFF drive/hot plug/drive sled mounted

 

 

 

N20-D064SSD

 

64 GB Low Height SATA SSD SFF drive/hot plug/drive sled mounted

 

 

 

1. This SSD requires UCS capability catalog version 1.0.46 or later.

Cisco UCS B230 Blade Server Installation and Service Note

10

OL-23811-01

 

 

Page 10
Image 10
Cisco Systems UCSEZB230EX256 manual Installing and Removing a Solid State Drive, Product ID Description