Chapter 3
Advanced Configuration
Add a Media Folder
Use this screen to add a media folder.
Media Folder
Media Folder
Display Name Create a name for the folder. This will appear in the Database table on the Media Server screen.
Partition The name of the partition is displayed. Location The location of the folder is displayed.
New Folder Create a name for the physical location of the folder. Then click Create.
Share entire Partition Select this option if the folder should include the entire partition.
If you do not want to share the entire partition, then select the folder you do want to share.
Current Folder The current folder is displayed.
Folder Name The available folders are listed by Folder Name.
Enter into Folder To display
Return to Upper Folder To return to the previous folder, click this button.
Click Save Settings to apply your changes, or click Cancel Changes to clear your changes. Click Close to exit the screen.
On the Media Server screen, click Save Settings to apply your changes, or click Cancel Changes to clear your changes.
Storage > FTP Server
The storage options are available when a USB storage device is connected to the USB port of the Router.
The FTP Server tab creates an FTP server that can be accessed from the Internet or your local network.
Storage> FTP Server
Setup
Server Name The default server name of the Router is WRT610N.
FTP Server Select Enabled to use the Router as an FTP server. Otherwise, select Disabled. An external USB hard drive or USB disk must be connected to the USB port to use this service.
Internet Access Select Enabled to allow access of the FTP server from the Internet. Otherwise, select Disabled to only allow local network access.
FTP Port Enter the FTP Port number to use. The default is 21.
Access
This section lets you add FTP folders that can be accessed through the FTP client.
Specify Folder to Access To add an FTP folder to the Access table, click this button. The FTP Folder screen appears. Proceed to Create or Edit an FTP Folder, page 23.
Summary To view a list of FTP folders, click this option.
For each FTP folder, the Display Name, Partition, and Folder location are displayed.
The database table lists the FTP folders with the following information: Display Name, Partition, and Folder.
Edit To change the access settings of an FTP folder, click this option, and the FTP Folder screen appears. Proceed to Create or Edit an FTP Folder, page 23.
Simultaneous | 22 |
