Cisco Systems WS-X6624-FXS specifications Installing the 24-Port FXS Analog Interface Module

Installing the 24-Port FXS Analog Interface Module

Table 5 24-Port FXS Analog Interface Module Specifications (continued)

Specifications	Description
Dimensions (H x W x D)	1.2 x 14.4 x 16 in. (30 x 356 x 406 mm)
Weight	Approximately 3 lb (1.36 kg)
Software requirements	Catalyst 6500 Series Switch supervisor engine software
	version 5.5 or later
	Cisco CallManager software release 3.0 or later

Installing the 24-Port FXS Analog Interface Module

Slot 1 on the Catalyst 6500 Series Switch is reserved for the supervisor engine (see Figure 2). If you are using a redundant supervisor engine, it would go in slot 2; otherwise, slot 2 can be used for other modules. The 24-port FXS analog interface module can be installed in any of the other slots.

Figure 2 Catalyst 6006/6506 Switch Chassis

Supervisor engine 1

Redundant supervisor engine

3

Switching

4

modules

FAN

STATUS 5

Fan

assembly 6

WS-X6K-SUP2-2GE
			CONSOLE											100%Switch	Load
			PORT														PORT 1				PORT 2
			MODE
SUPERVISOR2	CONSOLE							PCMCIA
										EJECT				1%
WS-X6K-SUP2-2GE
			CONSOLE											100%Switch	Load
																	PORT 1
			PORT																		PORT 2
			MODE
SUPERVISOR2	CONSOLE							PCMCIA
										EJECT				1%
WS-X6408
	1				2			3
											4			5
																	6			7
																							8
8 PORT GIGABIT ETHERNET
WS-X6408
	1				2			3
											4			5
																	6			7
																							8
8 PORT GIGABIT ETHERNET
WS-X6224
1	2	3	4	5	6	7
							8	9	10	11	12	13	14	15
															16	17	18	19	20	21	22	23
24 PORT 100FX																							24
WS-X6224
1	2	3	4	5	6	7	8
								9	10	11	12
												13	14	15	16	17	18	19	20
24 PORT 100FX																				21	22	23	24

o o

INPUT FAN OUTPUT
FAIL
INPUT	FAN OUTPUT
OK	FAIL

Power supply 1

Power supply 2

18224

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

The section is divided into the following topics:

•Required Tools, page 12

•Removing Modules, page 12

•Installing Modules, page 13

Catalyst 6500 Series 24-Port FXS Analog Interface Module Installation Note

78-10975-02 11