Cisco Systems WS-X6624-FXS What to Do After Installing the 24-Port FXS Analog Interface Module

What to Do After Installing the 24-Port FXS Analog Interface Module

Table 6	RJ-21 Connector Pinout (continued)
Port	Connector Pin		Port	Connector Pin
Number	Number	Signal	Number	Number	Signal
5	5	Ring	17	17	Ring
	30	Tip		42	Tip
6	6	Ring	18	18	Ring
	31	Tip		43	Tip
7	7	Ring	19	19	Ring
	32	Tip		44	Tip
8	8	Ring	20	20	Ring
	33	Tip		45	Tip
9	9	Ring	21	21	Ring
	34	Tip		46	Tip
10	10	Ring	22	22	Ring
	35	Tip		47	Tip
11	11	Ring	23	23	Ring
	36	Tip		48	Tip
12	12	Ring	24	24	Ring
	37	Tip		49	Tip
–	–	–	–	25, 50, 51, 52	GND

What to Do After Installing the 24-Port FXS Analog Interface Module

After you have installed the 24-port FXS analog interface module, refer to the Catalyst 6500 Series Switch Software Configuration Guide for complete configuration details. Note that all signaling configuration is done through Cisco CallManager; refer to the most recent version of Cisco CallManager documentation for configuration instructions.

Catalyst 6500 Series 24-Port FXS Analog Interface Module Installation Note

16 78-10975-02