4.2 Removing Jammed Paper

1.Turn the printer power off.

2.Open the printer cover.

3.Remove the jammed paper including any paper chips remaining. (Remove the paper roll set in the holder as well.)

4.Reinstall the paper roll and close the printer cover.

5.Turn on the printer. The auto cutter mechanism is initialized and the alarm is cleared.

CAUTION!

■If the cutter blade remains protruded with paper jammed, press the FEED button. If the cutter blade does not move back, performe the above step 1 through 3 and then turn the printer on without a paper roll. Contact your Citizen Systems dealer. Be carefull not to have your hand injured by the cutter blade in the operation.

■The print head is hot immediately after printing. DO NOT touch it with your hand. DO NOT touch the heating element of the head with a bare hand or metal object either.

4.3Cleaning the Print Head

1.Turn the printer power off.

2.Open the printer cover.

3.Wait several minutes. Wipe off any debris on the heating element of the head using a cotton swab soaked in ethyl alcohol.

Print (thermal) head

CAUTION!

The print head is hot immediately after printing. DO NOT touch it with your hand. DO NOT touch the heating element of the head with a bare hand or metal object either.

— 18 —