2Set paper to the printer.

This printer has three types of built-in paper sensors.

In case of label, set it so that label is positioned on the label light receiving sensor and label light emitting sensor. In case of black mark paper, set it so that the printable portion (other than black mark) is positioned on the black mark sensor. With this state kept, closing the printer cover causes ERROR LED to blink with the buzzer sound.

Label light emitting sensor

Black Mark sensor(BM1)

Label light receiving sensor

Black Mark sensor(BM2)

Black Mark sensor(BM3)

3Adjust the sensitivity of the paper sensor and measure the length of paper. Pressing the FEED switch causes label to be fed and paper sensor sensitivity adjustment and paper length measurement are carried out automatically. If the FEED button is pressed during the paper measuring, the result will be printed out as follows, and the printer memory switch will be initialized.

*The measuring result is a reference value

showing a label length

showing a gap between labels

< Example of label measuring result >

— 27 —