Switch No. | Setting | 0 (OFF) |
| 1 (ON) |
| |||||||
Memory | Buzzer |
|
| Valid |
|
|
| Invalid |
| |||
Line Pitch |
| 360 |
|
|
|
|
| 406 |
| |||
|
|
|
|
|
| |||||||
USB Mode | Virtual COM |
| Printer Class |
| ||||||||
Reserved |
|
| Fixed |
|
| − |
| |||||
No use |
|
| Fixed |
|
| − |
| |||||
Fine Printing |
| Invalid |
|
| Valid |
| ||||||
No use |
|
| Fixed |
|
|
| − |
| ||||
|
|
|
|
|
|
|
|
|
|
|
| |
No use |
|
| Fixed |
|
|
| − |
|
Switch No. | Setting | Default | Set Values |
Memory | Baud Rate | 19200 bps | 1200 bps, 2400 bps, 4800 bps, 9600 bps, |
|
|
| 19200 bps, 38400 bps, 57600 bps, 115200 bps |
Data Length | 8bits | 7bits, 8bits | |
Stop Bit | 1bit | 1bit, 2bits | |
Parity | NONE | NONE, EVEN, ODD | |
Flow Control | DTR/DSR | DTR/DSR, XON/XOFF | |
DMA Control | Valid | Valid, Invalid | |
VCom Protocol | PC Setting | PC Setting, DTR/DSR, XON/XOFF | |
|
|
|
|
Memory | Print Width | 576 dots | 360 dots, 384 dots, 420 dots, 432 dots, 436 dots, |
|
|
| 512 dots, 576 dots, 640 dots |
Paper Type | 1 Color Normal | 1 Color Normal, 2 Color Normal | |
|
|
|
|
Memory | Code Page | PC437 | PC437/Katakana/PC850,858/PC860/PC863/ |
|
|
| PC865/PC852/PC866/PC857/WPC1252/PC864/ |
|
|
| Thai Code 18 |
Memory | International | USA | USA, France, Germany, England, Denmark, |
| Character |
| Sweden, Italy, Spain, Japan, Norway, |
|
|
| Denmark 2, Spain 2, Latin America, Korea, |
|
|
| Croatia, China |
Memory | Kanji | OFF | ON, OFF |
JIS/Shift JIS | JIS | JIS, Shift JIS | |
|
|
|
|
Memory | Print Density | 100% | 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, |
|
|
| 110%, 115%, 120%, 125%, 130%, 135%, 140% |
Print Speed | Level 9 | Level 1, Level 2, Level 3, Level 4, Level 5, | |
|
|
| Level 6, Level 7, Level 8, Level 9 |
ACK Timing | Before Busy | Before Busy, Same Period, After Busy | |
NV User | 192K bytes | 1K bytes, 64K bytes, 128K bytes, 192K bytes | |
|
|
|
|
NV Graphic | 384K bytes | 0 byte, 64K bytes, 128K bytes, 192K bytes, | |
|
|
| 256K bytes, 320K bytes, 384K bytes |
* In this printer, Memory Switches
Manual Setting of Memory Switch (Memory SW)
The memory switch can be selected, changed, or written by the combination of three actions: pressing the FEED button, pressing and holding the FEED button, and opening or closing the printer cover.
1.Entering memory switch setting mode.
Set paper to the printer and keep the printer cover open. With the FEED button pressed and held, turn the printer power on, and then press the FEED button twice. Close the cover. If the current settings of the memory switch etc. are printed, the printer is now in the memory switch setting mode.
— 24 —