Citizen Systems CLP 1001, CLP 1001, CPL 2001, CLP 6001, CPL 6002, CPL 6401, CPL 7201e, CPL 7202e, CLP 6002, CLP 7202e

thermal or thermal transfer printing, tear mode, etc.

To enter the printer setup mode, press and hold down the Pause key then press

the Feed key and r elease both ke ys. The fun ctions of the con trol keys ar e

described below.

Changes to the printer configuration are stored in “nonvolatile memory”. This

guarantees that the printer configuration is maintained even after the power is

turned off.

n Pause key: Selects the mode.

n Feed key: Selects the mode item.

n Stop key: Saves the selec tion contents and returns t he printer to th e

normal operati ng mode.

The functions indicated by an ♦ character work on the CLP 1001, 2001, 6001, 6002

and 6401 printers. Those with a ● character work on the CLP 7201e and 7202e

printers

LCD Indication Function Description

♦● Direct thermal or thermal transfer

printing

♦ Enable or disable peeler function

♦ Enable or disab le cutter func tion

♦ Enable or disab le tear-off function

● “AfterPrint” functions. Set the

operation of the printer after the

label has been printed.

♦● Select media gap detection method

either “edge” (label ga p), reflec tive

or continuous media

● Set the printhead temperature

● Set the print s peed in inc hes/secon d

● Set the feed sp eed in inch es/secon d

● Set the back feed speed in inch/sec

● Vertical label position adjustment.

● Horizontal label position adjustment.

● Stop position adjustment

● Settings Lock Off/On. When “on”,

causes the pr inter to ig nore

commands changing the above

values set on the control panel.

Transfer DirectTM

Peel OFF Peel ON

Cut OFF Cut ON

Tear OFF Tear ON

Edge Reflect ContinuP

HeadHeat Heat 01

PrintSpd

Feed Spd

Back Spd

Vert Adj

AfterPrt PeelWait AutoCut

TearBar NoAction

Heat 30

PSpeed 2 PSpeed 7

FSpeed 2 FSpeed 7

BSpeed 2 BSpeed 7

V-2.00in V+2.00in

HorizAdj H-2.00in H+2.00in

StopPos S-2.00in S+2.00in

SetLckOF SetLckON