Clarion BLT433 owner manual Calling with the module using voice commands

Using your CM-HS1

Calling with the module using voice commands

If your phone support voice-activated dialing, you can use this feature with your module. Note that voice-activated dialing on your phone must be enabled and voice tags (name and commands) previously stored. (Please refer to the phone’s user documentation for instructions on storing voice tags.)

1.Briefly press the “Answer” button on the module.

2.After the tone, say the name of the person you wish to call.

3.The mobile phone automatically dials your selection, and you’ll see the details of the call on the phone screen (varies with phone model).

4.When connected, you are free to communicate normally.

Note: The number of tones that you hear when voice dialing is dependent on the type of the phone. With some phones, you may only hear one tone. Say your voice command after the tone.

Ending a call

Use either of the following methods to end a call:

To end a call from the module, short press the module’s “Answer” button.

End a call from the phone’s Keypad.

Press “Answer” button to make or end a call

English

BLT433 11