English

Using your CM-HS1

Answering a call

Whenever your car stereo is operating, the hand free module is in standby mode awaiting the next call with the Blue LED showing, when an incoming call arrives the car stereo is mute automatically and the ring tone is reproduced through your car’s speaker. To answer the call press the “Answer” button on the module and speak normally.

Your may also answer the call by using your phone’s answer keypad. In this case, you can transfer the call to the module by following the instruction in the next section.

Note: The Clarion CE-NET car stereo must set to telephone interrupt mode to able work with the BLT433, details setting of the CE-NET car stereo

please refer the owner’s manual of each model.

To reject a call

When the car handsfree rings, long press the answer button.

Note: This dependent on the type of phone.

To turn off the microphone

During a call, long press or button to turn off the microphone. The Red LED will blinking when the microphone has been turned off. Long press or button again to un-mute the microphone.

Transferring a call

To transfer the sound to the car handsfree. During a call, short press the answer button or using transfer call function in the phone.

To transfer the sound to the phone. During a call, long press the answer button.

12 BLT433

Page 12
Image 12
Clarion BLT433 owner manual To reject a call