English
Installation
Installing CM-HS1
It is important that the module is installed with the internal microphone facing towards the user.
Use the Visor Clip to fix the module to the car sun visor, and route the main cable properly. (shown in Fig. 2)
Use the given mounting screws to tighten the module (shown in Fig. 1) to the Visor Clip if necessary. If installing the module anywhere else, care must be taken in order not to damage the connector of the unit. (shown in Fig. 3)
Check that the location of the microphone is adequate to
driver voice.
Mounting Screw
Fig. 1
6 BLT433
