Clarion CMD5 manual TV tuner functions, Watching a TV, Recalling a preset station, Auto store

TV Operations

TV tuner functions

When an optional TV tuner (additional TTX7501 Z CeNET module required) is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor.

Watching a TV

1.Press the [AM/FM] button and select the TV mode.

2.Press the [AM/FM] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2.

3.Press the [!] or [l] button to tune in the desired TV station.

Tuning

There are 3 types of tuning modes available, seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the [AM/FM] button and select the desired TV band (TV1 or TV2).

*If "MANU" is lit on the display, press and hold the [AM/FM] button for 1 second or longer. "MANU" on the display goes off, and seek tuning is now available.

2.Press the [!] or [l] button to automatically seek a station. Press the [!] button to automatically tune up the frequency band to the next available TV station; press the [l] button to automatically tune down.

Manual tuning

There are 2 manual tuning methods available: Quick tuning and step tuning.

When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.

1.Press the [AM/FM] button and select the desired band (TV1 or TV2).

*If "MANU" is not lit on the display, press and hold the [AM/FM] button for 1 second or longer. "MANU" lights on the display and manual tuning is now available.

2.Tune in a station.

•Quick tuning

Press and hold the [!] or [l] button for 1 second or longer to tune in a station.

• Step tuning

Press the [!] or [l] button to manually tune in a station.

Recalling a preset station

A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall.

1.Press the [AM/FM] button and select the desired TV band (TV1 or TV2).

2.To recall a stored TV station, press the desired [DIRECT] button.

*Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Manual memory

1.Select the desired station with seek tuning, manual tuning or preset tuning.

2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Auto store

Auto store selects 6 TV stations automatically and stores each one into preset memory.

If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory.

1.Press the [AM/FM] button and select the desired TV band (TV1 or TV2).

2.Press and hold the [ENT] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.

Preset scan

Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory.

1.Press the [ENT] button.

2.When the desired station is found, press the [ENT] button again to remain tuned to that station.

Note:

•Do not press and hold the [ENT] button for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.

Setting TVNTR and TV diver

To switch TV to VTR, to select the TV area, and to set the TV diver, see "Common Operations".

32 CMD5