Roughness
Ball-pointpen
Storage
•Do not expose compact discs to directsunlight
or any heat source.
•
Do
not expose compact discs to excess
humidity or dust.
•Do not expose compact discs to direct heat
from heaters.
•Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use of
such discs may cause malfunction or damage.
•To remove acompact disc from its storage
case, press down
on
the centerof the case and
lift the disc out, holding it carefully by the
edges.
•Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc or
cause breakdown of the internal mechanism.
Cleaning
•To remove fingermarks and dust, use asoft
cloth and wipe
in
astraight line from the center
of the compact disc to the circumference.
•Do not use anysolvents, such as commercially
available cleaners, anti-static spray, orthinner
to clean compact discs.
•After using special compact disc cleaner, let
the compact disc dry off well before playing
it.
Handling Compact Discs
Use onlycompact discs bearing the
~Q~~
or U
mark.
Do
not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded
in
CD-R/CD-RW mode may
not
be
usable.
Handling
•Compared to ordinary music CDs, CD-R and
CD-RW discs are easily affected by high
temperature and humidity. Prolonged
exposure to high heat and humidity may make
the discs unplayable. Therefore, do not leave
them for along time
in
the boat.
•New discs may
have rough
edges. If such
discs are used,
the player may
not work, orthe
sound may skip.
Use aball-point
pen orthe like to
remove any
roughness from the edge of the disc.
•Never stick labels
on
the surface of the
compact disc or markthe surface with apencil
or pen.
•Never
playa
compactdisc with any cellophane
tape or other glue
on
it
or with peeling off
marks. If you try to play such acompact disc,
you may notbe able to get
it
backout of the CD
player or it may damage the CD player.
Front Panel
Jl..CiAUTlON
When opening and closing thefront panel, be
careful not to catch yourfingers. They could
be injured.
1.
Always use this unit with the front panel
closed.
2.
Do
not force operations or use this device
abnormally when opening or closing the front
panel.
3.
Do
not use the front panel as atray to place
objects on when
it
is
open.
4.
When closing the front panel, do notpress the
[OPEN]
button.
5.
Strong impacts to the operating or dis'Jlay
section can cause damage or deform ltion.
6.
If the front panel does not open fully,
..
Jently
open it with your hand.
7.
Do not touch the panel OPEN detection
switch.
~
..
~I-
OPEN detection
sWitch.
CMD5
5