English
Basic Operations
Adjusting the
1.Press the [Z+] button and select the Z- Enhancer Plus mode to adjust.
2.Press the
[ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.
●When
●When “IMPACT 0” is selected, you can adjust the bass and treble in the range of
●When “EXCITE 0” is selected, you can ad- just the bass and treble in the range of
∗Press and hold the [Z+] button for 2 seconds or longer to change to the “CUSTOM” mode.
Bass/treble characteristics become flat and the indication “Z+FLAT” is shown in the display.
Press the [Z+] button again to change to the “Z+ OFF” mode.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
∗ The factory default setting is off.
1.Press and hold the
2.Press and hold the
Adjusting the subwoofer
When you default select one of mode (LPF50, LPF80, LPF120).
∗The factory default setting is
1. | Press the |
| subwoofer volume increases or decreases. |
2. | Press and hold the |
| subwoofer volume automatically increases or |
| decreases. |
Radio Operations
FM reception
For enhanced FM performance the ® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Changing the reception area
This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.
●Setting the reception area
1.Press the [BND] button and select the desired radio band (FM or AM).
2.While pressing the
3.While pressing the
∗Any station preset memories are lost when the reception area is changed.
Listening to the radio
1.Press the [FNC] button and select the radio mode. The frequency or PS appears in the display.
∗ PS: Programme service name
2.Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3.Press the [a] or [d] button to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning
1.Press the [BND] button and select the desired band (FM or AM).
∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
14 DXZ435