Operations Common to Each Mode
English
5.Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following orders: Numbers ➜ Symbols ➜ Capital letters ➜ Numbers…
6.Turn the [ROTARY] knob to select the desired character.
7.Repeat step 4 to 6 to enter up to 30 characters for message.
8.Press and hold the [] button for 2 seconds or longer to store the message in memory and cancel input message.
9.Press the [TITLE] button to return to the previous mode.
Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
∗The factory default setting is “5”. (Adjustment level:1to 8)
1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CONTRAST”.
3.Turn the [ROTARY] knob clockwise or counterclockwise to adjust the contrast.
4.Press the [TITLE] button to return to the previous mode.
Setting the method for title scroll
Set how to scroll in
∗The factory default setting is “ON”.
1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “SCROLL”.
3.Turn the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
●ON:
To scroll automatically.
●OFF:
To scroll just 1 time when the title was changed or the title key was pressed.
4.Press the [TITLE] button to return to the previous mode.
Dimmer control
You can set the dimmer control on or off.
∗The factory default setting is “ON”.
1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “DIMMER”.
3.Turn the [ROTARY] knob clockwise to “ON” or counterclockwise to “OFF”.
4.Press the [TITLE] button to return to the previous mode.
Setting LOW PASS FILTER
This function allows you to set the
∗The factory default setting is “LPF 120”.
1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “SW LPF”.
3.Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:
REAR ➜ LPF 50 ➜ LPF 80 ➜ LPF 120
4.Press the [TITLE] button to return to the previous mode.
Selecting AUX IN sensitivity
Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.
∗The factory default setting is “MID”.
1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “AUX SENS”.
3.Turn the [ROTARY] knob clockwise or counterclockwise as needed and select from “HIGH”, “MID” or “LOW”.
4.Press the [TITLE] button to return to the previous mode.
18 DXZ435