Clarion DXZ935 owner manual Radio Operations

English	AC-Processor II Operations
	Operation P.EQ
	A full range of frequency level can be minutely
	corrected with a smooth curve by frequency cor-
	rection in accordance with car models. Six kinds
	of P.EQ basic menus have been pre-stored in
	this unit according to the car models and the
	mounting positions of speakers. Thus, set it in
	accordance with the car type.
	1.	Press the [EQ] button to enter “P.EQ” mode.
	2.	Press the Band button to select “P.EQ BA-
		SIC”.
	3.	Press the [DIRECT] button to select P.EQ
		menu as below.
		1.SEDAN-1, 2.SEDAN-2, 3.WAGON-1,
		4.WAGON-2, 5.MINI VAN-1, 6.MINI VAN-2
	4.	Press the [EQ] button to return to the previ-
		ous mode.
	5.	Press and hold the [EQ] button for 1 second
		or longer so that the P.EQ effect is turned on
		or off.

Adjusting P.EQ

1.Select “P.EQ” menu which you want to edit on the basis of.

2.Press and hold the [TITLE] button for 1 sec- ond or longer.

3.Press the [a] or [d] button to select item to be adjusted.

There are “FRONT/REAR” ,“BAND” ,“FREQ” “GAIN” and “Q” available for the items ad- justed.

4.Press and hold the [DIRECT] buttons for 2 seconds or longer to store the edited con- tents.

∗You can give a title to user memory. For the in- putting method of titles, refer to the subsection “Entering titles” in section “Operations com- mon to each mode”.

∗The parameter created in this section is also effective when the unit is in both the “STD” and “PRO” mode.

Radio Operations

FM reception

For enhanced FM performance the® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.

Changing the reception area

This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.

●Setting the reception area

1.Press the [BND] button and select the de- sired radio band (FM or AM).

2.While pressing the [DISP] button, each time you press and hold the number “6” of the [DI- RECT] buttons for 2 seconds or longer, the reception area switches from inside the USA to outside the USA or from outside the USA to inside the USA.

∗Any station preset memories are lost when the reception area is changed.

Listening to the radio

1.Press the [FNC] button and select the radio mode. The frequency or PS appears in the display.

∗ PS: Programme service name

2.Press the [BND] button and select the radio band. Each time the button is pressed, the ra- dio reception band changes in the following order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3.Press the [a] or [d] button to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

18 DXZ935