Clarion DXZ935 owner manual Removing the DCP, Attaching the DCP

Models: DXZ935

1 30
Download 30 pages 57.1 Kb
Page 8
Image 8

English

6. DCP

theft. When detaching the control panel, store it

 

The control panel can be detached to prevent

 

in the DCP (DETACHABLE CONTROL PANEL)

 

case to prevent scratches.

 

We recommend taking the DCP with you when

 

leaving the car.

Removing the DCP

1.With the DUAL ACTION closed, turn off the power.

2.Press the [RELEASE] button deeply and take and pull the DCP to detach the DCP.

Attaching the DCP

1.Insert the DCP so that the A section on the right side of the DCP catches on the hook B on the unit.

2.Press the left side C of the DCP carefully to fit it in place.

CAUTION

Always close the DUAL ACTION before remov- ing the DCP.

If you remove the DCP with the DUAL ACTION open, the sloping console closes immediately. Be careful not to get your fingers caught.

The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.

If the [RELEASE] button is pressed and the DCP is not locked into place, it may fall out from vibration of the car. This can break the DCP, so after removing it, either install it on the unit or put it in its DCP case.

The connector connecting the unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with finger- nails, screwdrivers, etc.

If you apply to the control panel more force than that required with the control panel left open, the control panel will go down one step. This is due to safety mechanism engaged and is not a malfunction. In this case, press the [O] button two times to return the control panel to the original operating position. Using the con- trol panel being lowered results in a damage to the panel.

Do not use the control panel being left open as a tray to put an object on.

Moving the control panel manually will cause a malfunction such as getting out of order of the sloping mechanism, breakdown of the gears, etc. Do not draw the control panel forcibly.

When the control panel is moved manually, press the [O] button several times to see if the control panel returns to the normal position and functions properly.

Do not remove the DCP while you are driving a car.

Do not use the DCP being rickety.

Do not carry the DCP in a trouser pocket or the like directly. (The DCP may be damaged under load conditions.)

The DCP may jump out of the DCP case hous- ing the DCP when the case is opened ener- getically.

Note:

If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.

12 DXZ935

Page 8
Image 8
Clarion DXZ935 owner manual Removing the DCP, Attaching the DCP, Always close the Dual Action before remov- ing the DCP