PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 22
Caller ID Operations
Press UP (▲) or DOWN (▼) again to view the Caller ID content. Press DOWN (▼) to scroll the caller ID information from the most recent record. Or, press the UP (▲) button to scroll the Caller ID information from the oldest record.
If the caller’s number is more than (12) digits, the LCD will toggle the displayed message between the first 12 digits and the remaining digits.
If the Caller ID list is empty, the display will show - NO CALLS
■At anytime, the user can press FLASH button one time to go back to standby mode.
Or
■It will go back to standby automati- cally at 30 seconds time out if there is no action.
SAVING CALLER ID INFORMATION TO PHONEBOOK
1.While reviewing Caller information, press PROG key once.
2.The display shows SAVE TO, PHONEBOOK. Then it changes to ENTER TO END, and the Caller
number on the third line with the blink- ing cursor at the end of the number.
3.Use numeric key to add extra numbers. Press DEL/CH to erase any mistakes.
Or
Press DEL/CH to move cursor back
one digit. Then press any other numeric key to replace the number.
4.Press ENTER to confirm the number.
5.The display shows ENTER NAME
first and then the Caller’s name on the second line with blinking cursor at the end. The entered number is displayed on the third line.
6.Press 2 … 9 keys to add extra characters. Press DEL/CH to erase any mistakes.
Or
Press DEL/CH to move cursor back one character. Then press any other numeric key to replace the character.
7.Press ENTER to confirm the name.
8.The display will show NUMBER STORED first. Then it shows the name and number just saved.
■At anytime, user can press FLASH button one time to go back to stand by mode. Or
■It will go back to standby automati- cally at 30 seconds time out if there is no action.
22
