PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 20
Memory Storage
characters and numbers will replace the original phone record.
11. The display will show NUMBER STORED.
Adding the EMERGENCY Number
1.Unit must be in standby mode only.
2.Press MODE key twice. The display will show PHONEBOOK for 1 second and then display the first available record.
3.Press the UP(▲) or DOWN (▼) button to go to the record to be stored to the EMERGENCY key.
4.Press and hold the EMERGENCY key for 2 seconds.
5.The phone number is copied to the EMERGENCY key. The LCD will display MEM STORING for one (1) second and the handset will give a success keynote.
Dialing the EMERGENCY Number
1.Unit must be in standby mode only.
2.Press the EMERGENCY key once.
3.The display will show the stored name and number for 5 seconds. Otherwise it will show
4.Then the handset goes
Or
5.Press TALK key to make handset goes
6.Press the EMERGENCY key once. The display will show the stored name and number for 1 sec. Then the numbers will be sent out.
Deleting the EMERGENCY Number
1.Unit must be in standby mode.
2.Press the EMERGENCY key once.
3.If this key has been programmed, the display will show the stored number. Otherwise, it will show MEMORY EMPTY.
4.Press DEL/CH key once to delete this number.
5.The display will flash DELETE ?.
6.Press DEL/CH to delete. The handset will give a success keynote.
20
