Clarity 440 manual Callback from Caller ID Information

PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 23

Caller ID Operations

E

CALLBACK FROM CALLER ID

INFORMATION

To callback from incoming call information, the base T/P switch should be set at T.

While reviewing the incoming call list, press ENTER and the UP(▲) or DOWN (▼) key will format the number with the following dialing variations:

7 digits without a 1 prefix:

If the area code of the Caller ID number matches to the setting of the stored area code, the dialed numbers can be 7 digits only.

Area Code + 7 digits without a 1 prefix:

If the area code of the Caller ID number matches to the setting of the stored area code, the dialed numbers can be Area Code + 7 digits.

10 digits without a 1 prefix:

If the area code of the Caller ID number is different from the stored area code, the dialed numbers can be 10 digits without a 1 prefix.

10 digits with a 1 prefix:

If the area code of the Caller ID number is different from the stored area code, the dialed numbers can be 1 + 10 digits.

When reviewing the Caller ID information, press ENTER to display the phone number in a different format.

Example 1:

Stored Long Distance Service code: 1.

Stored area code: 770.

Stored incoming call number 770-123-4567.

1.Pressing the ENTER key will show blinking 123-4567.

2.Pressing the TALK or ENTER key again will dial out 1234567.

OR

3.Pressing the UP (▲) key will show blinking 770-123-4567. Then press the TALK or ENTER key again will dial out 7701234567.

OR

4.Pressing the UP(▲) key will show blinking 1-7701234567. Press the TALK or ENTER key will dial out 17701234567.

OR

5.Pressing the UP (▲) key will show blinking 123-4567 again.

N G L I S H

23