USING YOUR CORDED BASE
Answer a Call
When there is an incoming ring, pick up the corded handset or press <SPEAKER- PHONE> to answer the call.
End a Call
During a call connection, put the corded handset on the base station to end the call. Or press <SPEAKERPHONE> if you have a call in handsfree mode.
Adjust Earpiece and Handsfree Volume
During a call, you can adjust the earpiece volume from a selection of 5 volume levels (Level 1 to Level 5). If you are in a speakerphone mode, you can choose the speaker volume from a selection of 5 volume levels (Level 1 to Level 5).
During a call:
Press <UP/DOWN> to increase or decrease the volume level respectively. The current setting is shown. When you end the call, the settings will remain at the last selected level.
Boost
During a call, you can activate the booster function with the volume of earpiece increased by several dBs by pressing <BOOST>, “BOOST” displays on the screen. To cancel it, press <BOOST> again.
Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <CLEAR/MUTE> to mute the microphone and “MUTED” is displayed on the LCD. Your caller cannot hear you. Press <CLEAR/MUTE> again to unmute the microphone. “MUTED” is disappeared and the display will show “LINE IN USE”.
Memory Keys
There are 5 memory keys (from M1 to M5) on the corded base for you to store frequent use numbers. After a number is stored in any of these memory keys, you can simply press once on one of these memory keys to dial out to the number stored in it directly
Store a number into a memory key
1. In idle mode, enter the telephone number you want to store.
16
