USING YOUR CORDED BASE
Record/play/delete personalized announcement
1.Press <OK/MENU> and <UP/DOWN> to select Answering sys.
2.Press <OK/MENU> and <UP/DOWN> to select Announcement. Display shows Play (2) Del (3) Rec (7)
3.To record your announcement, press 7; wait for the beep and start speaking; press 5 when finished.
4.To play the current announcement, press 2; you will hear your announcement (if recorded) or the
5.To delete (restore default announcement), press 3; you will hear a confirmation beep, the display shows Annc deleted.
ANSWERING MACHINE MESSAGES
Play messages on the answering machine
If you have new messages, the display will show e.g. 01/02 MSGS, which means you have 1 new message out of total 2 messages. New messages are played first, and then are saved as old messages, until they are deleted. Old messages are played again after all new messages are played completely.
Using the direct key
In idle
1.Press <PLAY/STOP> to listen to messages and memos.
2.Press <PLAY/STOP> if you want to stop the playback.
3.Press <REPEAT / RD/P> once if you want to repeat the current message from the beginning, or press twice to skip back to the previous message during message playback.
4.Press <SKIP FORWARD / INT> if you want to skip forward to the next message during message playback.
5.Press < X > if you want to delete the current message being played.
Note: You cannot delete New Messages, so you will have to play them before trying to delete.
28
