Clarity E713CC Searching is displayed, Call does not work, No display, Cannot get a dial tone

Models: E713CC

1 64
Download 64 pages 33.16 Kb
Page 57
Image 57

TROUBLESHOOTING

“SEARCHING” is displayed.

• Answering machine is out of range. Reduce the range.

The call does not work.

Service not activated, or wrong operator, or wrong setting. Check your Subscription with network or change the dial mode.

No display.

• Recharge battery

CORDLESS HANDSET

My cordless handset doesn’t work at all

Make sure the power cord to the cordless handset charger base unit is securely plugged into a working electrical outlet.

Make sure the telephone line cord is securely and firmly plugged into the answering machine and the telephone wall jack.

Make sure the power cord to the answering machine is securely plugged into a working electrical outlet.

Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to the charger base when not in use.

If the battery is depleted, it may take approximately 30 minutes to charge the handset before it shows Low Battery.

Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

You may need to purchase a new battery. Use only the rechargeable battery supplied with the unit, or contact the customer service helpline found in this User Guide to purchase the correct replacement batteries.

I cannot get a dial tone

First try all the suggestions previously listed.

Move the cordless handset closer to the answering machine. You may have moved out of range.

57

Page 57
Image 57
Clarity E713CC manual Searching is displayed, Call does not work, No display, My cordless handset doesn’t work at all