Clarity E713CC manual Deregister all handsets, Press page on base 4 sec Then press # on handset

Models: E713CC

1 64
Download 64 pages 33.16 Kb
Page 55
Image 55

USING YOUR CORDLESS HANDSET

Deregister all handsets

You can deregister handsets. You may need to deregister your handsets if:

You have five registered handsets and need to replace a handset.

– OR –

You wish to change the designated handset number of your registered handsets.

You must first deregister ALL the handsets, and then register each handset you wish to use again, one at a time.

1.Press and hold <PAGE/FLASH> on the telephone base for about 10 seconds - display shows Deregistering....

2.When complete, the handset screen alternately shows:

Press PAGE on base 4 sec”.

– and –

“Then press # on handset”

To register the handset(s) to the telephone base again, follow the registration instruc- tions in the Register a handset section.

Note: There are no visual or audible alerts to indicate the base is under registration mode.

Note: If the deregistration process is not successful, you might need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in.You cannot deregister the handset(s) if any system handset is in use.

55

Page 55
Image 55
Clarity E713CC manual Deregister all handsets, Press page on base 4 sec Then press # on handset