CLARITY W1000 FEATURES
You must switch the tone/pulse switch on the top edge of the phone to tone before responding to these prompts. In summary, dial the phone number you want to call in pulse mode, switch to tone mode to interact with the automated answering system, switch back to pulse mode when your call is done. When switching from Pulse to Tone during a call, there will be a 3 second delay from the time you first push a key in tone mode until the key press is transmitted.
Important: You must have tone signaling service to use the TONE feature on the Clarity telephone. If in doubt, contact your local telephone company.
redialing numbers which are busy. The phone number stored for redial will be reset with every new call you make.
➤To Operate Last Number Redial:
1.Depress the hookswitch to get a new dial tone.
2.Press the ÒRedialÓ Button once.
3.Stay on the line, and your call will be dialed.
The last number dialed will be stored in the Clarity telephone for you until you dial another number.
➤To Set the TONE/PULSE Switch:
1.Move the switch towards the correct setting.
2.Depress the hookswitch once.
3.The phone will now dial in the mode you selected.
➤Last Number Redial
Last Number Redial allows you to auto- matically redial the last telephone number you called. This feature is convenient for
➤Flash
Flash is a special feature that is required to use some calling services provided by your local phone company, such as call waiting. Consult your guide to these ser- vices which is available from your local phone company. Flash serves the same purpose as pressing and releasing the hook switch very quickly.
14 | CLARITY W1000 |
