PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received through the USB port requires it, regardless of the default printer language.
Values:
On* | Printer examines data on the USB interface and selects PostScript emulation if the data |
| indicates that is the required printer language. |
Off | Printer does not examine the incoming data. The printer uses PCL emulation to process the |
| job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup |
| Menu if PCL SmartSwitch is Off. |
See also:
PCL SmartSwitch; Printer Language
USB Buffer
Purpose:
To configure the size of the USB input buffer.
Values:
Disabled | Disables serial (Parallel, USB) port. Any jobs already buffered on the disk are |
| printed before normal processing of incoming jobs resumes. |
Auto* | Printer automatically calculates the USB Buffer size (recommended setting). |
3K to maximum | User specifies the USB Buffer size. The maximum size depends on the amount |
size allowed | of memory in your printer, the size of the other link buffers, and whether |
| Resource Save is set to On or Off. To maximize the range for the USB Buffer |
| size, disable or reduce the size of the parallel, serial, and network buffers. |
Note: Changing the USB Buffer menu item automatically resets the printer.
See also:
Resource Save
177