Symptom | Cause | Solution |
The operator panel | The printer self test failed. | Turn the printer off, wait about 10 seconds, and turn |
display is blank or |
| the printer back on. |
displays only |
| Performing Self Test appears on the display. |
diamonds. |
| |
| When the test is completed, the Ready message is | |
|
| |
|
| displayed. |
|
| If the messages do not appear, turn the printer off |
|
| and call for service. |
|
|
|
Jobs do not print. | The printer is not ready to | Make sure Ready or Power Saver appears on the |
| receive data. | display before sending a job to print. Press Go to |
|
| return the printer to the Ready state. |
|
|
|
| The output bin is full. | Remove the stack of paper from the output bin, and |
|
| then press Go. |
|
|
|
| The specified tray is empty. | Load paper in the tray. |
|
| See Loading the trays for detailed instructions. |
|
|
|
42
