Removing a firmware card

Complete the following steps to remove a firmware card. If an option card has been installed, you must remove it before removing the firmware card. See Removing an option card.

WARNING: Optional firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch an optional firmware card.

1Remove the access panel (see Removing the printer system board access panel for help).

2Gently pull the firmware card straight out in one motion. Do not pull one side and then the other.

3Place the card in its original packaging, or wrap the card in paper and store it in a box.

4Replace the access panel (see Reinstalling the system board access panel).

73

Page 73
Image 73
Lexmark 812 manual Removing a firmware card