Clarity TELEPHONE W1000 Programming, To Dial Programmed Numbers, To Delete Programmed Numbers

PROGRAMMING

4.Dial the number you wish to store. The number is not transmitted while you are programming it.

5.Press the ÒPROGRAMÓ button again.

6.Select the appropriate memory storage button. Press and release this button.

7.Place handset back into cradle.

8.Repeat steps 3 through 7 for all other memory storage locations.

➤To Dial

Programmed Numbers:

1.Pick up the handset and listen for a dial tone.

2.Press the appropriate Memory Storage Button.

3.The number will be dialed automatically.

➤To Delete Programmed Numbers

1.Pick up handset.

2.Press and release the program button.

3.Press either the # key or 0 either 7 or 11 times (Once for each digit you are trying to delete).

4.Press and Release the program

button again.

5.Press the memory location button you are wanting to delete the number from.

6.Return the receiver to the cradle.

➤Change A Stored Number

Replace a stored number by programming a new number its place.

Important: The HELP BUTTON is not pre-programmed for 911. Once program- ming is completed select the appropriate sticker from the sticker set provided and place on the red button.

Programming Note: During the program- ming sequence the dial tone MAY NOT break and in some instances an operator intercept may come on the line. This is normal. Continue with the programming sequence to completion.

Note: You can program a pause into the dialing sequence if necessary. Since there is not a pause button on the telephone, the redial button serves this purpose during programming. Programming in a pause will cause the phone to wait 3 seconds before dialing any more numbers. For Example: Pressing a memory button that has 9 (pause) 555-1212 programmed into it will dial the number 9, then wait 3 sec- onds and dial 555-1212. In most cases, you will not need to use a pause. You can store up to 16 digits and the pause func- tion counts as 1 of those digits.

18 CLARITY W1000