TROUBLESHOOTING

Unable To Hear Phone Ringer

1.Too many phone or phone devices on a line may cause your phone to not ring. Disconnect one (1) or two (2) of the devices to see

if the problem is eliminated. If not, contact your local phone company for load guide lines.

2.If power is not being supplied to the phone, the extra loud ringer, will not work.

Volume Control Does Not Work

BOOST must be activated to turn on the additional amplification.

Static On The Line

1.Your phone may be located near a touch lamp, microwave, refrigerator or other household appliances.Try relocating your phone to another area.

2.A cordless phone on your line may cause static.Try disconnecting the cordless phone.This may eliminate the problem.

3.Extra devices attached to the telephone, such as CID units and answering machines may cause static. Disconnecting the devices may eliminate the problem.

4.If there is also a DSL service in the home, this will cause interference on the line. That interference is then amplified by the phone, causing a less than optimal quality of conversation. Install the phone line filter provided by the DSL service provider to reduce the amount of interference on the line.

Interference

1.Check cords and connections. Frayed or poorly connected cords can cause interference. Swap cords if necessary.

2.A RFI (Radio Frequency Interference) filter can be placed on the line to help minimize or eliminate radio or CB transmissions.Try relocating the telephone to another area.

25

Page 25
Image 25
Clarity XL50 manual Unable To Hear Phone Ringer, Volume Control Does Not Work, Static On The Line, Interference