Disassembly

2 - 16 Removing the Processor

2.Disassembly

Removing the Processor

1. Turn off the computer and remove the battery (page 2 - 8).
2. Remove screws - from the memory socket cover.
3. Carefully lift up the memory socket cover (a fan cable is still attached to the mainboard and you can discon-
nect it).
4. Remove screws - from the heat sink, in the order indicated on the label.
5. Carefully lift up the heat sink off the computer.
1 7
910
11 14
15

Figure 9

Processor Removal
a. Remove the screws.
b. Carefully lift the cover off
the computer.
c. Remove the screws in
the order indicated.
d. Remove the heat sink.
Heat Sink Unit
The elongated heat
sink pictured ap-
plies to models in this
series with two CPU
fan units. Some mod-
els may have a shorter
heat sink unit and a
single CPU fan.
15
9. Socket Cover
15. Heat Sink
•10 Screws
a.
11
13 15
14
9
10
8
1
5
4
36
7
2
b.
c. d.
12
Reassembly Screw
Order
When replacing the
heat sink, make sure
you insert the screws
in the same order indi-
cated on the label.