Clevo D480V manual Removing the Keyboard & Center Cover, Keyboard & Center Cover Removal

2.Disassembly

Disassembly

Figure 11

Keyboard & Center

Cover Removal

a. Press in the keyboard latches and elevate the keyboard.

b. Disconnect the keyboard cable.

c. Lift the keyboard up and out of the computer.

d. Remove the screws from shielding plate.

e. Remove the shielding plate.

f.Carefully lift up the cent- er cover off the compu- ter.



6. Keyboard

19.Shielding Plate

20.Center Cover

• 12 Screws

Removing the Keyboard & Center Cover

1.Turn off the computer and remove the battery (page 2 - 8).

2.Press the four keyboard latches 1 - 4 at the top of the keyboard to elevate the keyboard from its normal position (you may need to use a small screwdriver to do this).

3.Carefully lift the keyboard up and disconnect the keyboard ribbon cable at point 5 (be careful not to bend the key- board ribbon cable).

4.Set the keyboard 6 aside and remove screws 7 - 18 from the keyboard shielding plate, and lift off the shielding plate 19 .

5.Remove the center cover 20 .

a. b. c.

	1		2	3	4
						5
						6
d.					e.	f.
7	8	9	10	11		20
18			16	15	12
	17			13
				14
						19

2 - 18 Removing the Keyboard & Center Cover