Clevo D480V manual Removing the Inverter, Inverter Removal

Removing the Inverter

1.Turn off the computer and remove the battery (page 2 - 8), HDD (page 2 - 9), memory (page 2 - 10), CD device (page 2 - 12), Bluetooth module (page 2 - 14), WLAN module (page 2 - 15), processor (page 2 - 16), keyboard and center cover (page 2 - 18), LCD assembly (page 2 - 19) and top case module (page 2 - 21).

2.Remove screws (and any rubber covers) 1 - 6 from the front of the LCD assembly.

3.Run your finger around the middle of the frame to carefully unsnap the LCD front panel module 7 .

4.Remove screw 8 from the inverter, then turn over the inverter and disconnect cables 9 & 10 .

5. Lift the inverter 11 up off the LCD assembly.

a.b.

1 2 3 4

7

d.

5 6

910

c.

e.

8

11

Disassembly

Figure 22

Inverter Removal

a. Remove the screws.

b. Remove the front panel module.

c. Remove the screw on the inverter.

d.Turn the inverter over and disconnect the ca- bles.

e. Remove the inverter.



7.Display Front Pan- el Module

11. Inverter Module

• 7 Screws

2.Disassembly

Removing the Inverter 2 - 29