AM/FM TUNER
Your player comes with a
1.Make sure that the AM loop antenna and the FM antenna have been connected properly on the rear panel of the player.
2.Press MODE to enter AM/FM mode.
3.Press the AM or FM button to listen to the AM of FM band, respectively.
4.Press STOP to toggle between the two tuning modes: CH (preset) and Tune (manual).
•CH Mode: Listen to Preset Channels.
This is the default tuning mode. Press the TUNING + / - buttons to tune to higher or lower preset channels, or press the CHANNEL + / - keys on the remote.
•Tune Mode: Listen to Manually-Tuned Channels.
The
Note: If a button or key has not been pressed for longer than approximately 3 seconds in Tune Mode, the player will automatically switch back to the default CH Mode.
•To store preset channels automatically:
•Press AUTO. The player will automatically scan the entire band and memorize any stations in reception range. This will overwrite any previously store channels. To stop
•To store preset channels manually:
1.Press MEMO to manually store the current station as a preset channel. The front- panel display will flash “F 00”
2.Use the numeric keypad to enter the desired preset channel number.
3.Press MEMO again to store the preset channel.
•To delete a preset channel:
• Tune to the preset channel you want to delete, and then press CLEAR to delete it.
22
