Cable Connections

Turn off all devices before making system connec- tions. Do not connect the power until all connections have been made.

Antenna Input

Use this connection if you are using an indoor or outdoor antenna to receive television signals.

Antenna Line

1.Connect the antenna line (75Ω coaxial cable) to the TV

Antenna In jack located on the rear of the unit.

To view an analog antenna signal (NTSC):

1.Set the Antenna option to “Air” TV setup menu.

2.Set the unit to TV mode (the screen will display the current channel number).

NTSC television broadcasts will cease in the USA on February 17, 2009. To receive over-the-air television broadcasts after this date, use the digital ATSC tuner (DTV mode).

Page 24

Coby Electronics Corporation

 

 

Page 24
Image 24
COBY electronic TV-DVD2090, TV-DVD1390 instruction manual Antenna Input, To view an analog antenna signal Ntsc