Roller Alignment Procedure
Look at the top of the laminator and notice the position of the WHITE LINE on top of the gap adjusting knobs. At this point they should be very close to pointing in the same direction. Now adjust them so they are completely aligned (pointing in the same direction).
Figure 9
Any time you raise and lower the top roller you must have the lines facing the same direction. Example- When you turn the knob on the right 3 times you must also turn the knob on the left 3 times so the lines point in the same direction.
This procedure will assure even application of pressure by the top roller.
Figure 10
Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone:
Email: sales@codamount.com | www.codamount.com |
January 2006 | |
