Laminator Set-Up
When the crated machine is delivered be sure to inspect for any shipping damage that may have occurred. If there is any damage notify the carrier and Coda, Inc. immediately. Remove the cardboard carton and unbolt the machine from the wooden base. Locate the laminator on a flat surface with enough space to work with your materials. It is important to use the laminator in a clean room as dirt and dust will stick to exposed adhesive. Adhesives and laminates perform best in a room with a temperature of 70 degrees F or higher.
In the crate is a cardboard box containing the footswitch and pressure adjustment tool (shown in section labeled Setting the Spring Pressure). Place the footswitch on the floor near the
Figure 1
Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone:
Email: sales@codamount.com | www.codamount.com |
January 2006 | |
