Laminating a Print with a Sheeted Laminate (continued)
Start the laminator while holding the release liner and run it as slow as possible. Running slow applies the pressure for a longer period of time across the entire width which will result in a better adhesion of the laminate to the print.
Figure 22
Be sure to hold the release liner, peeling it back slowly as the laminate is fed into the laminator. Be careful not to allow the release liner to feed into the laminator and get pinched between the rollers.
Figure 23
Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone:
Email: sales@codamount.com | www.codamount.com |
January 2006 | |
