Maintenance & Service Guide
Presario 1800 Series
Models: 1825 and 1800T
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures
Specifications
Pin Assignments Battery Pack Operations
Removal & Replacement Procedures
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Status Panel
Internet
Button Board
Heatspreader
Network
Interface Card
Modem
Hard Drive
DisqPlay
Module
Processor
DVD or
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly 
Diskette Drive 
Battery
Charger Board
Speaker
Assembly
System Board 
Memory
Module
Removing
the Battery
Charger
Board
To remove the battery charger board, complete the following steps:
1.Prepare the computer for disassembly.
2.Remove the palmrest cover with touch pad.
3.Remove the keyboard.
4.Remove the heatspreader.
5.Remove the status panel assembly.
6.Remove the Internet Button board.
7.Remove the display panel assembly.
8.Remove the hard drive.
9.Remove the Upper CPU cover.
10.Remove two screws from the battery charger board, unplug the board from the connector on the system board, and lift out of the chassis.
When replacing the battery charger board, ensure that
NOTE: the pins are aligned with the connector on the system board.
To replace the battery charger board, reverse the previous procedures.
